Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

13.06.2025 01:33

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Here is a simplified AC power diagram.

Julia DeVillers On Sign of Anal Cancer She Mistook For Menopause - TODAY.com

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

so, what happens?

Steelers players defend attending Trump rally at U.S. Steel plant: 'I'm not apologetic about that' - Pittsburgh Post-Gazette

There are three different concepts here that are getting confused.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

What are some tips for a girl with low self-esteem to start dating?

2024–10–14 [Omar Gharbi Omar Gharbi ]

So, the voltage could go up to 500 volts, and the fuse will not open up.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Is there a reason why many men give up on dating and relationships? Is the dating scene difficult for them?

One

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

What's your wildest & weirdest fantasy?

A fuse is a non-resetable over current circuit protector.

the problem then depends on "how fast does the fuse operate?".

The MOV will conduct when the voltage exceeds 50% of line voltage.

Justin Bieber posts cryptic message about 'transactional relationships' after fans begged him to 'get help' - Page Six

At one ohm, the resistor has a maximum of 1 watt power.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

This one hit behind the barn.

Childhood infections, stress may increase MS risk: Study - Multiple Sclerosis News Today

First Sentence:

nine

(Dc diagram shown, AC is similar).

Alaska’s former chief medical officer resigns from CDC post as federal agency faces turmoil - Anchorage Daily News

One is “what exactly is in a ‘surge protector’ ? ”

But… the neutral is now “floating” because of the 1 ohm resistance.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

What is the STAR interview method?

what exactly is a ‘surge’ protector?

What does a fuse do?

This is where the MOV conducts again, and dissipated the energy.

Scientists Uncover Giant 33-Foot Dinosaur That Could Redefine Jurassic Evolution - Indian Defence Review

Barnstars:

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

At least they know the answer if they wanted it.

What questions will be asked by the executive director of JP Morgan for 6 years of experience in Java? The technical rounds are already cleared.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

[old diagram got deleted by accident]

It seems Mohan does not understand the difference between a comment and an Answer.

Democrat voters, why are you so naive, easy to manipulate, can't see a liar standing right in front of you and why won't you research your party? You will find they have a plan for all W. Nations and it's evil.

He then describes the function of a fuse.

[image of Common-mode choke]

The bolt then partially travels down the line to your home.

ESA’s Bug-Eyed Robot Telescope Just Spotted Its First Asteroid — And It Could Save the Planet - The Daily Galaxy

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

These are simplified answers to the original question, and does not change anything I wrote above.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Why is it so common for married white women to have an affair with black men? Does it bother white guys?

He then describes Rainy Season and Lightning.

For this case there are devices called Metal oxide varistors (MOV).

An AC voltage/ current source, and an ac inductive load.

He then asserts :

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

These devices are installed between the “hot” and “neutral” and protective ground.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

eight

Edit 2024–10.

The third is lightning and “how it gets conducted into a home.”

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Because the load is inductive, the current lags the voltage.(by a bit).

In schematic diagrams this is the symbol for a fuse:

A circuit breaker is similar, but is resettable.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

The other is “what does a “fuse” do?”

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Upvotes:

2024–10–16 [ OO OLAOYE OYEBODE ]

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

but this device (an Inductor) … impedes the rapid changes in the current.

What is lightning?

This is 'the assistant's answer'

This is where this question deviates from being a 'generic' question, and becomes more specific.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

2024–10–10[John johnson John Johnson ]

It also is a device that limits the change in current flow.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

a photo is worth a thousand words.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

but I think this circuit , shows a few more pieces.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Now when you have a certain ac resistance, then a current flows in a loop.

There are two important concepts here.

I post the exact comment here.

This device then solves the entire problem.

But it can get overloaded, and no longer works.